Overview
Tensorgrip® F50 is a high-solids, low VOC contact adhesive designed to meet strict California emissions compliance requirements while delivering reliable strength across a wide range of substrates.
With fast tack, a soft bond line, and high temperature resistance, Tensorgrip® F50 performs exceptionally in fabric, foam, insulation, and rubber applications. Its low odour and toluene-free formulation support cleaner, safer production environments.
Sizes
- 500mL Aerosol
- 22L Canister
- 220L Jumbo
Colours
- Clear
Registered
brand of
Applications
Main applications
- Fabric
- Foam
- Insulation
- Rubber
See all applications in our Technical Data Sheet
See all applications in our Technical Data Sheet
Accessories
Only use the following accessories for a safe and successful application.
Hose Black Rubber
Professional Spray Gun
Spray Gun Tip Lechler
Canister Trolley Round
Product images shown are indicative and may not exactly match the actual item.
How to use
- Surface Preparation
Ensure surfaces are clean, dry, and free from dust, oil, or grease.
- Setup
Shake the canister or aerosol well. For canisters, connect hose and spray gun securely. Check fittings for leaks before use.
- Application
Apply adhesive to one or both surfaces at 80–100% coverage. For double-sided bonding, spray both surfaces—one vertically and one horizontally.
If the spray tip clogs, remove and clean with lacquer thinner or Tensorgrip® C101 Citrus Adhesive Cleaner.For best results, apply between 16–27°C in a well-ventilated workspace.
- Bonding
Allow to tack off until touch-dry. Align and press surfaces firmly together. Initial bond strength allows immediate cutting or trimming; full strength develops in 1–3 days.
- Clean-Up
Clean spray tips with Tensorgrip® C101 Citrus Adhesive Cleaner. Do not pierce the nozzle with a pin.
Downloads
Find the quality product you need
Product Finder
