Overview
Tensorgrip® F20 is engineered for rapid, reliable bonding across foam, upholstery, and textile applications. With very fast tack times, high solids, and pressure-sensitive adhesive technology, Tensorgrip® F20 delivers consistent holding strength and a soft, flexible bond line.
Its long open time, low VOC formula, low odour, and toluene-free composition make it ideal for clean, high-speed production environments.
Sizes
- 500mL Aerosol
- 13L Canister
- 22L Canister
- 220L Jumbo
Colours
- Clear
- Green
Registered
brand of
Applications
Main applications
- Fabric
- Foam
See all applications in our Technical Data Sheet
See all applications in our Technical Data Sheet
Accessories
Only use the following accessories for a safe and successful application.
Hose Black Rubber
Professional Spray Gun
Spray Gun Tip 6501
Canister Trolley Round
Product images shown are indicative and may not exactly match the actual item.
How to use
- Surface Preparation
Designed to be applied to both surfaces to be bonded together.
Ensure surfaces are clean, dry, and free from dust, oil, or grease. - Setup
Shake the canister or aerosol well. For canisters, connect hose and spray gun securely. Check fittings for leaks before use.
- Application
Spray approximately 10–20 cm from the surface at a 90° angle, applying a uniform coat to achieve 80–100% coverage. Spray both surfaces—one vertically and one horizontally.
If the spray tip clogs, unscrew it from the gun and clean with lacquer thinner or Tensorgrip® C101 Citrus Adhesive Cleaner.
- Bonding
Allow the adhesive to tack off until touch-dry. Align and press surfaces firmly together.
- Clean-Up
Clean spray tips with Tensorgrip® C101 Citrus Adhesive Cleaner.
Downloads
Find the quality product you need
Product Finder
