Overview
Tensorgrip® H30 is a high-solids, non-chlorinated spray adhesive engineered for superior bonding of quilt and fibrous insulation materials to sheet metal in HVAC applications.
With high initial strength, long open time, and low odour, Tensorgrip® H30 offers strong, reliable adhesion across polystyrene, EPS, fabrics, foam, plywood, and more. Its low VOC, HAPS-free, and toluene-free formulation ensures safer, cleaner application in industrial environments.
Sizes
- 500mL Aerosol
- 7L Canister
- 13L Canister
- 22L Canister
- 220L Jumbo
Colours
- Clear
- Green
Registered
brand of
Applications
Main applications
- Insulation
- Polystyrene
- Timber/wood
See all applications in our Technical Data Sheet
See all applications in our Technical Data Sheet
Accessories
Only use the following accessories for a safe and successful application.
Hose Black Rubber
Professional Spray Gun
Spray Gun Tip 6501
Canister Trolley Round
Product images shown are indicative and may not exactly match the actual item.
How to use
- Surface Preparation
Ensure surfaces are clean, dry, and free from dust, oil, or grease.
- Setup
Shake the canister or aerosol well. Connect hose and spray gun securely. Check fittings for leaks before use.
- Application
Spray approximately 10–20 cm from the surface at a 90° angle, applying a uniform, even coat to achieve 80–100% coverage. For double-sided bonding, spray one surface vertically and the other horizontally.
If the spray tip clogs, remove and clean with lacquer thinner or Tensorgrip® C101 Citrus Adhesive Cleaner.For best results, apply between 16–27°C in a well-ventilated workspace.
- Bonding
Allow to tack until touch-dry. Press surfaces firmly together. Initial strength enables trimming or cutting immediately; full strength develops in 1–3 days.
- Clean-Up
Clean spray tips with Tensorgrip® C101 Citrus Adhesive Cleaner. Do not pierce nozzle with a pin.
Downloads
Find the quality product you need
Product Finder
