Overview
Tensorgrip® TC42 delivers precision and control during composite infusion and RTM processes. It securely holds reinforcing fibres in place and fully dissolves into polyester, vinyl ester, and styrene resins, leaving no residue or marks.
Tested and proven with epoxy systems at under 9 g/m², Tensorgrip® TC42 delivers fast tack, low odour, and dependable performance for efficient composite production.
Sizes
- 500mL Aerosol
- 22L Canister
Colours
- Clear
- Green
Registered
brand of
Applications
Main applications
- Fibreglass infusion
- FRP/GRP
- Thick fabric
- Thin fabric
See all applications in our Technical Data Sheet
See all applications in our Technical Data Sheet
Accessories
Only use the following accessories for a safe and successful application.
Hose Black Rubber
Professional Spray Gun
Spray Gun Tip 8002
Canister Trolley Round
Product images shown are indicative and may not exactly match the actual item.
How to use
- Surface Preparation
Ensure all surfaces are clean, dry, and free from dust, oil, grease, or contaminants.
- Setup
Shake the canister or aerosol well. For canisters, attach hose and spray gun securely and check all connections for leaks before use.
- Application
Spray 10–20 cm from the surface at a 90° angle, applying an even, consistent coat. For double-sided bonding, spray both surfaces—one vertically and one horizontally—for optimal coverage.
For best results, apply between 16–27°C in a well-ventilated workspace.
- Bonding
Allow the adhesive to tack off until touch-dry. Position materials accurately and apply firm pressure to bond.
- Clean-Up
Clean spray tips with Tensorgrip® S105 Acetone Cleaner. Do not clear the nozzle using a pin.
Downloads
Find the quality product you need
தயாரிப்பு தேடுபவர்
