Overview
Tensorgrip® 232 is a multi-purpose contact spray adhesive engineered to create stronger bonds by remaining on the surface of the substrate rather than soaking in. This allows for greater adhesive contact and delivers very high initial bond strength across foam, fabric, carpet, insulation and timber-based materials.
With fast tack, a soft bond line and low VOC formulation, Tensorgrip® 232 is well suited to upholstery, mattress manufacturing, insulation fabrication and other applications where bond performance and productivity are critical.
Sizes
- 500mL Aerosol
- 22L Canister
Colours
- Clear
- Green
Registered
brand of
Applications
Main applications
- Carpet
- Fabric
- Foam
- 절연
- MDF/fibreboard/chipboard
See all applications in our Technical Data Sheet
See all applications in our Technical Data Sheet
Accessories
Only use the following accessories for a safe and successful application.
Hose Black Rubber
프로페셔널 스프레이 건
Spray Gun Tip 6501
Canister Trolley Round
Product images shown are indicative and may not exactly match the actual item.
How to use
- Surface Preparation
Ensure all bonding surfaces are clean, dry and free from dust, oil, grease, wax and other contaminants.
- Setup
Shake the canister or aerosol well. For canisters, connect hose and spray gun securely and check all fittings for leaks.
- Application
Spray 10–20 cm from the surface at a 90° angle, applying a uniform coat to achieve 80–100% coverage. Apply adhesive to both surfaces. For optimum coverage, spray one surface vertically and the other horizontally.
If the spray tip clogs, remove and clean with lacquer thinner or Tensorgrip® C101 Citrus Adhesive Cleaner.
- Bonding
Allow adhesive to tack off until it no longer transfers to the knuckle when touched. Carefully align and press surfaces together with firm, even pressure.
- Clean-Up
Clean spray tips with Tensorgrip® C101 Citrus Adhesive Cleaner.
Downloads
Find the quality product you need
제품 찾기
