Overview
Tensorgrip® TC43 is a super-tacky, heavy-mat web spray adhesive engineered for deep crevice and high-demand composite applications.
Designed to deliver exceptional grab with minimal adhesive usage, it excels in areas such as hull and bow infusion where fibre control is critical. With high tack, low VOCs, and reliable heat resistance, Tensorgrip® TC43 provides consistent performance across fibreglass, carbon fibre, and thick or thin fabrics.
Sizes
- 500mL Aerosol
- 22L Canister
Colours
- Clear
- Green
- Pink
Registered
brand of
Applications
Main applications
- Fibreglass infusion
- FRP/GRP
- Thick fabric
- Thin fabric
See all applications in our Technical Data Sheet
See all applications in our Technical Data Sheet
Accessories
Only use the following accessories for a safe and successful application.
Hose Black Rubber
프로페셔널 스프레이 건
Spray Gun Tip 6501
Canister Trolley Round
Product images shown are indicative and may not exactly match the actual item.
How to use
- Surface Preparation
Ensure surfaces are clean, dry, and free from dust, oil, or grease.
- Setup
Shake the canister or aerosol well. For canisters, connect hose and spray gun securely. Check fittings for leaks before use.
- Application
Spray 20–40 cm from the surface at a 90° angle for even coverage. For double-sided bonding, spray both surfaces—one vertically and one horizontally.
For best results, apply between 16–27°C in a well-ventilated workspace.
- Bonding
Allow the adhesive to tack off until touch-dry. Align and press surfaces firmly together.
- Clean-Up
Clean spray tips with Tensorgrip® S105 Acetone Cleaner. Do not pierce the nozzle using a pin.
Downloads
Find the quality product you need
제품 찾기
