Overview
Tensorgrip® T30 is formulated to withstand the challenges of vinyl and interior fabric bonding where delamination is common.
With fast tack, high initial strength, very high heat resistance and proven plasticiser resistance, it delivers long-lasting adhesion across vinyl, rubber, leather and plastic substrates in high-demand automotive environments.
Sizes
- 22L Canister
Colours
- Clear
Registered
brand of
Applications
Main applications
- Rubber
- Synthetic leather
See all applications in our Technical Data Sheet
See all applications in our Technical Data Sheet
Accessories
Only use the following accessories for a safe and successful application.
Product images shown are indicative and may not exactly match the actual item.
How to use
- Surface Preparation
Designed to be applied to both surfaces being bonded.
Ensure surfaces are clean, dry, and free from dust, oil or grease. - Setup
Shake the canister well. Connect hose and spray gun securely. Check fittings for leaks before use.
- Application
Surface Preparation
Designed to be applied to both surfaces being bonded.
Ensure surfaces are clean, dry, and free from dust, oil or grease.Setup
Shake the canister well. Connect hose and spray gun securely. Check fittings for leaks before use.
Application
Spray approximately 10–20 cm from the surface at a 90° angle. Apply an even, uniform coat to achieve 80–100% coverage. Spray both surfaces — one vertically, one horizontally.
If the spray tip clogs, remove and clean with lacquer thinner or Tensorgrip® S105 Acetone Adhesive Cleaner.
For best performance, apply between 16–27°C in a well-ventilated area.
Bonding
Allow to tack off until touch-dry. Align materials and press together firmly.
Clean-Up
Clean spray tips with Tensorgrip® S105 Acetone Adhesive Cleaner.
- Bonding
Allow to tack off until touch-dry. Align materials and press together firmly.
- Clean-Up
Clean spray tips with Tensorgrip® S105 Acetone Adhesive Cleaner.
Downloads
Find the quality product you need
Product Finder